Carbon Crystal Decorative Wall Panel

Product Description

Our Carbon Crystal Decorative Wall Panel combines modern aesthetics with durable performance to transform interior walls into sleek, low-maintenance surfaces. Manufactured from an advanced carbon-crystal composite, the panel offers excellent dimensional stability, a fine textured finish, and strong resistance to stains and humidity — making it ideal for living rooms, feature walls, reception areas, hotels and retail displays. Lightweight and available in a range of sizes and surface finishes, the panel installs cleanly over existing substrates and supports both glued and mechanical fixing methods. It’s an excellent choice for designers and homeowners seeking a contemporary, high-tech look without the maintenance of natural stone or specialty veneers. Custom sizes, finishes, and color-matching are available on request. (Replace bracketed specs with your exact model data.)

Features

• Modern carbon-crystal composite surface with refined texture and minimal seams

• Lightweight yet rigid construction for easy handling and reduced installation time

• Moisture- and stain-resistant finish — suitable for kitchens, bathrooms & commercial interiors

• Fine edge finish for seamless visual effect (butt-join or reveal joint options)

• Available in multiple finishes: matte, satin, brushed, patterned (custom finishes on request)

• Low VOC, easy to clean, and low maintenance

• Custom sizes and thicknesses available for architectural projects

Applications

• Interior feature walls (living rooms, lobbies, reception areas)

• Office partition cladding and meeting room accent walls

• Retail displays, hotel interiors, restaurant wall finishes

• Bathroom and kitchen splashback (use specified waterproofing/adhesive)

• Ceilings and column wraps (confirm structural requirements)

• Renovation projects where overlay installation reduces downtime

Specifications

(Replace placeholders with your exact product specs)

• Material: Carbon crystal composite (decorative face + core substrate)

• Standard sizes: [e.g. 600 × 1200 mm], [e.g. 1220 × 2440 mm] (custom sizes available)

• Thickness: [e.g. 3 mm / 6 mm / 8 mm / 10 mm — choose model variants]

• Surface finishes: Matte / Satin / Brushed / Textured / Printed

• Edge profile: Square edge / Micro-bevel / Tongue & groove (option)

• Weight: Approx. [X kg/m²] (dependent on thickness)

• Water resistance: Water-resistant surface; recommended adhesive and seal for wet zones

• Fire rating: [Insert fire rating e.g. Class B / Class C / EN/ASTM rating if tested]

• VOC: Low VOC; meets [insert certifications if any]

• Certifications: CE / RoHS / [insert other certificates if available]

• Warranty: [e.g. 5-year limited warranty — replace as appropriate]

Installation

NOTE: Provide model-specific installation guide & local code compliance documents to customers. Below is a general guideline.

1. Prepare substrate — surface must be flat, clean, dry and free of dust or grease. Repair major irregularities.

2. Measure & plan — lay out panels to minimize cuts and align patterns/joins. Dry-fit panels before final fixing.

3. Choose fixing method — adhesive-only (high-bond construction adhesive), mechanical fixing (screws with caps) or hybrid (adhesive + mechanical for heavy/vertical applications). Follow adhesive manufacturer’s instructions.

4. Apply adhesive — apply recommended adhesive beads or trowel bed per adhesive spec. Press panel into position and apply temporary supports if needed.

5. Joint finishing — use matching sealant or joint trim for waterproof areas; use gap spacers for consistent reveal joints where required.

6. Cutting & trimming — score-and-snap for thin panels or use fine-tooth saw for thicker panels; protect finished face.

7. Cleaning — clean surface with a soft cloth and mild cleaner after installation. Avoid abrasive cleaners.

8. Final inspection — check alignment, secure fixings, and edge seals. For wet zones, ensure waterproofing membranes and tiles/fixtures integrate properly.

Pro tip: For installations in bathrooms or kitchens, use specified waterproof adhesives/sealants and consult our technical datasheet.

Why Choose Us ？

• Specialized material expertise — we manufacture carbon-crystal decorative panels engineered for interior cladding applications.

• Architect-friendly — custom sizes, finishes and cutting services to fit project requirements.

• Sustainability — low VOC manufacturing and recyclable components where applicable.

• Quality assurance — factory inspection, sample approvals and documentation for commercial projects.

• Local support & fast lead times — we provide installation guides, technical support and flexible order quantities for both small renovations and large projects.